Wink Vibracorer

Vibracore
Specifications
Basic information on each piece of equipment
AttachmentDateSize
File wink_vibracore_manual_feb2010.pdf10/09/13 11:32 am3.38 MB
File flex_cable_service_20-02-13.pdf10/09/13 11:32 am176.55 KB

This corer was donated by Condor Earth Technologies (Sonora, CA) in Sept 2013. This is a model from the early 1990s and they purchased extra casings. 
A number of videos are available online showing the use of this equipment
Components

  • Gin pole: 9'2" by 2'5" (top of mast) and 5" wide.
  • Diamond-plated Base plate: 3'6" x 3' and 1' high
  • Motor: 2' x 1.5', 60 lbs
  • 2 Flex-cables: 14' long
  • 12 Drill rod casing sections: 5' long, 3" diameter, 39 lbs each
  • 3 Drill bits (3" diameter)
  • 3 Drill heads
  • 3 gallon Bucket of end sections and sampling bags